Laser CV Boot Banding Tool With Cutter

Laser CV Boot Banding Tool With Cutter
Laser CV Boot Banding Tool With Cutter
£16.04
Out of stock
Free Shipping with DHL & DX Delivery

Free Shipping in 1–3 Business Days

Standard delivery is FREE for orders over £65.

Learn more.

click & collect with TW Tools

Click & Collect

Buy online & collect from our superstore in 30 minutes.

Learn more.

Returns Policy Apply

Exchange or Return

Send it back within 14 days of purchase.

Learn more.

Product Code:
TCN2916

Laser CV Boot Banding Tool With Cutter

How to use the Laser CV Boot Installer and Cutter 1. Wrap the securing band around the CV Boot with the clamp on the outside (against the coil of the band). Make sure the band is seated firmly in the correct channel of the CV joint. 2. Feed the end of the band through its clamp on the other end and pull the band to sit firmly around the CV Boot. 3. Feed the free end of the band straight through the slot at the nose of the tool and onward through the cutter section into the slot on the winding mandrel until the end just shows through. 4. Wind the mandrel until the securing band is as tight as possible around the Boot and CV Joint. 5. Turn the black arm of the tool forward over the tool and cut off any surplus banding. 6. Turn the end of the band back on itself and secure it between the lugs on the band’s clamp. 7. Disengage the coiled band in the tool by pulling the wrench sideways and freeing from the tool FOR ADDED STRENGTH A DOUBLE-WRAPPED BAND IS RECOMMENDED